I am seeing "Error Code 011" (Cannot Connect to Roku) during setup.

If you are attempting to setup your Roku player and you see a Code 011 error, this means the Roku player momentarily lost connection to the Roku update server. There may be a chance that Roku servers are not available due to a scheduled maintenance.  When this happens, try again after a short period of time.  Then just perform a power cycle of the Roku player with the instruction below.  You should be able to continue where you left off.

To resolve this do the following:

  • Power cycle the Roku player by removing the power connector from the back of the Roku player.
  • Reconnect the power and wait for the player to restart, then follow the on-screen instructions.

If power cycling the Roku player did not resolve the error then a network power cycle might. 

    • To do this remove the power connector from these devices. (note that your router and modem may be one physical unit)
      • Roku player
      • Wireless router
      • Modem 
    • Reconnect the power connectors in this order:
      • Modem
      • Wireless router
      • Roku player
    • Allow the modem and gateway to boot up completely until it is in normal operation mode.
    • Follow the on-screen instructions from the Roku player and TV.

If none of the above steps worked then a reset of the Roku player may be needed.  You can find reset instructions here.

If all the above steps have not helped, please contact Roku Customer Support here

 

Was this article helpful?
6 out of 30 found this helpful
Have more questions? Submit a request